Brief Introduction
The Trademark Paper Production Line Equipment Is Composed Of A Breaking Machine, A Crusher, A Drying Machine, A Cleaning Sink, A Feeder, A Pelletizer, A Pulverizer, And So On. The Whole Set Of Equipment Covers An Area Of About 30 Meters Long And About 4 Meters Wide.
Production Line Operation Procedure:
Generally, The Purchased Trademark Paper Is Wrapped Up For Convenient Transportation, Which Inevitably Contains Iron And Other Impurities, So We First Use A Breaking Machine To Break It Up, And Then Enter The Crusher For Crushing After Removing Iron And Impurities, So That The Crusher Is Not Easy To Be Damaged. The Crushed Materials Passing Through The Crusher Enter The Cleaning Water Tank Through Jiaolong. Generally, It Is Recommended That The Water Tank Should Be At Least 19 Meters Long. The Separation Purity Of The Trademark Paper Will Be Directly Affected If The Water Tank Is Too Short Or The Design Is Unreasonable, And The Later Production Quality And Output Will Be Affected. The Density Of Water Is Used To Separate Pp And Pvc In The Trademark Paper. Pp Will Float In Water And Pvc Will Sink. Pp Can Be Directly Sold Or Granulated By Being Lifted Into The Dryer By The Pp Elevator. Pvc Enters The Dryer By The Pvc Elevator For Further Processing. After Being Dried By The Dryer, Three Or Four Moisture Will Remain. In Order Not To Affect The Output Of Pellets, It Can Be Shaken In The Sun And Processed After The Moisture Is Completely Evaporated. Our Pelletizer Is Now A Pelletizer With Automatic Water Addition, Automatic Temperature Control And Automatic Feeding, Which Can Effectively Avoid Paste Phenomenon Caused By Improper Operation Of Workers. After The Pellets Are Processed, They Can Be Ground. Our Grinding Machine Is Automatically Bagged, Automatically Dedusted, And Automatically Weighed. The Operation Is Simple. After Saying So Much, Do You Think That The Grinding Of Trademark Paper Is Too Complicated? In Fact, It Is Not Complicated At All. Hebei Zhihao Environmental Protection Machinery Manufacturing Co., Ltd. Needs Only Three Or Four Workers To Operate So Many Equipment Easily, Which Basically Realizes The Automatic Assembly Line!
Features:
(1) Easy Operation, Electric Control Platform Operation, Saving Time And Effort;
(2) Scientific Design, So That Plastic Can Be Fully Cleaned In The Cleaning Tank And Impurities Can Be Separated;
(3) Automatic Fishing Of Floating Materials, Fast And Effective Separation;
(4) High Stability, High Efficiency And Low Energy Consumption;
(5) Energy Saving And Environmental Protection, Water Resources Recycling, Making Production Costs Lower;
(6) A Protective Cover Is Set Above The Sink To Protect The Safety Of Operators;
(7) Can Be Customized According To Customer Needs, And Can Be Equipped With Production Lines;
Configuration:
|
Serial number
|
Equipment name
|
Specification and model
|
Quantity
|
Remarks
|
|
1
|
Unpacking station
|
|
1Platform
|
|
|
2
|
Breaking machine
|
3200*1200*1400
|
2Platform
|
|
|
3
|
feeding conveyer
|
4000*1000*2280
|
2Platform
|
Connecting crusher
|
|
4
|
Crusher
|
1400
|
3Platform
|
|
|
5
|
Drying machine
|
30kw
|
5Platform
|
|
|
6
|
Belt conveyor1
|
7000*1000*500
|
1Platform
|
Conveying dried materials
|
|
7
|
Belt elevator
|
8000*1000*4000
|
1Platform
|
Lift to the washing tank
|
|
8
|
Cleaning sink
|
9000*2200*2500
|
2Platform
|
|
|
9
|
Rinsing tank
|
（10000*2）*1500*1500
|
2Platform
|
|
|
10
|
Belt conveyor
|
10000*1000*500
|
1Platform
|
Conveying the dried sinking material
|
|
11
|
Feeding conveyer
|
4000*700*2350
|
4Platform
|
Connecting pelletizer
|
|
12
|
Agglomerator
|
300L
|
4Platform
|
|
|
13
|
Material extractor
|
800*800*1800
|
4Platform
|
Feeding to vibration distributor
|
|
14
|
Vibration distributor
|
|
2Platform
|
|
|
15
|
Air and water cooling system
|
|
2set
|
|
|
16
|
Milling machine
|
660
|
2Platform
|
|
