Product brand: Zhihao
product application: drilling and oil filtering of waste household appliance compressors.
product introduction:

The full-automatic compressor drilling and oil discharge equipment conveys the compressor through the conveyor, and realizes the full-automatic drilling of the compressor through the electromagnet adsorption mechanism and the drilling mechanism, and then transfers the perforated compressor to the oil filter platform through the operating mechanism for oil discharge. The whole process requires little manual operation, with a high degree of automation and few manual operations, which can greatly reduce the labor intensity and improve the work efficiency.
product advantages:

The drilling and draining of the compressor can be completed by one key through the control system from clamping, rotating the workbench, drilling, draining and loosening the workpiece, achieving full automation control.
Through the control system, the conveying speed is controlled and the oil draining time of the compressor is controlled, which realizes the automatic drilling and oil draining process of the whole process.
No manual operation, saving labor and reducing cost.

The feed is conveyed by V-shaped chain plate, and the compressor will not roll on the panel, which ensures the stability of conveying. The conveying device realizes the automation of conveying and improves the working efficiency. It is an efficient conveying device.

Fixed mechanisms are set on both sides of the drilling position to clamp the compressor, ensuring the safety of technical workers.
the feeding end adopts an electromagnet adsorption device, which controls the magnetic size through current, making the application more flexible and convenient.
The end is powered off by a travel switch, which immediately demagnetizes the electromagnet and automatically drops the compressor onto the conveyor.

A stainless steel filter screen is set in the groove to filter impurities. The filter screen can be pulled out for cleaning, which is convenient for later maintenance. The oil drain tank is equipped with an oil drain valve, which is convenient for oil drainage.
Technical parameters:

Capacity	≥150台/h
Main motor	2.2kw
servo motor	0.75kw
Drilling and milling spindle motor	2.2kw
Drilling and milling speed	9000r/min
Chain pitch	76.2mm
Overall dimensions	3400*700*2380mm